Installing the switch, Rack-mounting – Cisco 3550 User Manual

Page 35

Advertising
background image

2-5

Catalyst 3550 Switch Hardware Installation Guide

OL-6155-01

Chapter 2 Switch Installation

Installing the Switch

–

One cable guide and one black Phillips machine screw for attaching the cable guide to one of
the mounting brackets

–

One RPS connector cover (for wall mounting)

–

Two Phillips pan-head screws (for attaching the RPS cover)

–

Four Phillips truss-head screws (for wall-mounting brackets)

–

One DC terminal block plug (also called a terminal block header; only Catalyst 3550-24-DC
switches)

Installing the Switch

This section describes these installation procedures:

•

Rack-Mounting, page 2-5

•

Wall Mounting, page 2-12

•

Table or Shelf Mounting, page 2-14

Rack-Mounting

Warning

To prevent bodily injury when mounting or servicing this unit in a rack, you must take special
precautions to ensure that the system remains stable. The following guidelines are provided to ensure
your safety:

•

This unit should be mounted at the bottom of the rack if it is the only unit in the rack.

•

When mounting this unit in a partially filled rack, load the rack from the bottom to the
top with the heaviest component at the bottom of the rack.

•

If the rack is provided with stabilizing devices, install the stabilizers before mounting
or servicing the unit in the rack.

Statement 1006

To install the switch in a 19-inch or 24-inch rack (24-inch racks require optional mounting hardware),
follow the instructions described in these procedures:

•

Attaching Brackets to the Catalyst 3550-12T and 3550-12G Switches, page 2-6

•

Attaching Brackets to the Catalyst 3550-24, 3550-24-DC, 3550-24-FX, 3550-24PWR, and
3550-48 Switches, page 2-8

•

Mounting the Switch in a Rack, page 2-12

Note

Installing the switch in a 24-inch rack requires an optional bracket kit not included with the switch. You
can order a kit containing the 24-inch rack-mounting brackets and hardware from Cisco. For the
Catalyst 3550-12T and 3550-12G switches, order part number RCKMNT-3550-1.5RU=. For the
Catalyst 3550-24, 3550-24-DC, 3550-24-FX, 3550-24PWR, and 3550-48 switches, order part number
RCKMNT-1RU=.

Advertising