Cisco XR 12410 - Manual (Page 108)

Chapter 3 Installing the Cisco XR 12410 Router
Supplemental Bonding and Grounding Connections
3-26
Cisco XR 12410 and Cisco XR 12810 Router Installation Guide
OL-17441-01
Supplemental Bonding and Grounding Connections
Before you connect power to the router, or power on the router for the first time,
We recommend that you connect the central office ground system or new
equipment building system (NEBS) to the supplemental bonding and grounding
points on the router. For more information on supplemental bonding and
grounding cable requirements, see the
“NEBS Supplemental Unit Bonding and
Grounding Guidelines” section on page 2-18 .
Use the following procedure to attach a grounding cable lug to the router:
Step 1 Install the locking washers and nuts over the bonding and grounding cable studs
and tighten securely (
Figure 3-19 ).
Figure 3-19 Router Rear NEBS Bonding and Grounding Studs
53269