Document Outline

• Cisco XR 12410 and Cisco XR 12810 Router Installation Guide
• Contents
• Preface
• Product Overview
  • Physical and Functional Description of Router
    • AC and DC Power Subsystems
      • AC Power Entry Modules
      • DC Power Supplies
  • Switch Fabric and Alarm Card Overview
    • Switch Fabric Card Functionality
      • Clock Scheduler Card
      • Switch Fabric Card
    • Alarm Cards and Alarm Display
  • Line Card and Route Processor Overview
    • Line Cards
    • Route Processor
    • Performance Route Processor Overview
      • PRP PCMCIA Card Slots and Status LEDs
      • PRP Ethernet Ports and Status LEDs
      • PRP Auxiliary and Console Ports
      • PRP-3 LEDs
      • PRP Reset Switch
      • PRP Alphanumeric Message Displays
    • PRP Memory Components
      • PRP SDRAM
      • PRP SRAM
      • PRP NVRAM
      • PRP Flash Memory
    • Upper and Lower Cable Management Brackets
  • Upgrading a Cisco 12000 Series Router to a Cisco XR 12000 Series Router
  • Horizontal Cable Management Bracket
    • Blower Module
• Preparing for Installation
  • Safety Guidelines
    • General Safety Guidelines
    • Compliance and Safety Information
    • Laser Safety
    • Preventing Electrostatic Discharge Damage
    • Lifting Guidelines
    • Laser Safety
  • Site Requirement Guidelines
    • Rack-Mounting Guidelines
      • Enclosed Rack
      • Open Rack
      • Telco Rack
      • Site Layout and Equipment Dimensions
    • Air Flow Guidelines
    • Temperature and Humidity Guidelines
    • Power Connection Guidelines
      • AC-Powered Routers
      • DC-Powered Routers
    • NEBS Supplemental Unit Bonding and Grounding Guidelines
    • Site Wiring Guidelines
  • PRP Port Connection Guidelines
    • PRP Auxiliary and Console Port Connections
      • PRP Auxiliary Port Signals
      • PRP Console Port Signals
    • PRP Ethernet Connections
      • PRP RJ-45 Ethernet Connections
  • Alarm Display Connection Guidelines
• Installing the Cisco XR 12410 Router
  • Pre-Installation Considerations and Requirements
  • Installation Overview
    • Required Tools and Equipment
    • Unpacking and Positioning the Router
  • Removing Components Before Installing the Chassis
    • Removing Power Supplies
      • Removing AC PEMs
      • Removing DC PEMs
    • Removing the Blower Module
  • Removing Cards from the Chassis
    • Removing Cards from the Line Card and RP Card Cage
    • Removing Cards from the Switch Fabric and Alarm Card Cage
  • Rack-Mounting the Router Chassis
    • Verifying Rack Dimensions
    • Installing Rack-Mount Brackets-Optional
    • Installing Center-Mount Brackets-Optional
    • Installing the Chassis in the Rack
  • Supplemental Bonding and Grounding Connections
  • Reinstalling Components After Installing the Chassis
    • Reinstalling Power Supplies
      • Reinstalling AC PEMs
      • Reinstalling DC PEMs
    • Reinstalling the Blower Module
  • Reinstalling Cards in the Chassis
    • Reinstalling Cards in the Switch Fabric and Alarm Card Cage
    • Reinstalling Cards in the Line Card and RP Card Cage
  • Connecting Line Card Network Interface Cables
  • Connecting PRP Route Processor Cables
    • Connecting to the PRP Console Port
    • Connecting to the PRP Auxiliary Port
    • Connecting to the PRP Ethernet Ports
  • Connecting Alarm Display Card Cables
  • Connecting Power to the Router
    • Connecting Power to an AC-Powered Router
    • Connecting Power to a DC-Powered Router
• Troubleshooting the Installation
  • Troubleshooting Overview
    • Troubleshooting Using a Subsystem Approach
    • Normal Router Startup Sequence
    • Identifying Startup Issues
  • Troubleshooting the Power Subsystem
    • Troubleshooting the AC-Input Power Subsystem
    • Troubleshooting the DC-Input Power Subsystem
      • Troubleshooting a DC PEM
      • Additional Power Subsystem Troubleshooting Information
    • Troubleshooting the Power Distribution System
  • Troubleshooting the Processor Subsystem
    • Performance Route Processor Overview
      • PRP PCMCIA Card Slots and Status LEDs
      • PRP Ethernet Ports and Status LEDs
      • PRP Auxiliary and Console Ports
      • PRP Reset Switch
      • PRP Alphanumeric Message Displays
    • Troubleshooting the Route Processor
      • Troubleshooting Using the RP Alphanumeric Display
    • Troubleshooting Line Cards
      • Troubleshooting Using the Line Card Alphanumeric Display
    • Troubleshooting Using the Alarm Display
      • Monitoring Critical, Major, and Minor Alarm Status
  • Troubleshooting the Cooling Subsystem
    • Blower Module Operation
    • Power Supply Operation
    • Overtemperature Conditions
    • Isolating Cooling Subsystem Problems
• Maintaining the Router
  • Prerequisites and Preparation
  • Powering Off the Router
    • Removing and Replacing the Air Filter Door Front Cover
  • Cleaning or Replacing the Chassis Air Filter
    • Cleaning or Replacing a Chassis Air Filter
  • Removing and Replacing the Blower Module
    • Troubleshooting the Blower Module Installation
  • Removing and Replacing AC and DC Power Subsystem Components
    • Installation Guidelines
    • Removing and Replacing an AC PEM
    • Troubleshooting the AC Power Supply Installation
    • Removing and Replacing an AC PDU
    • Removing and Replacing a DC PEM
    • Troubleshooting a 2800 W DC PEM Installation
    • Removing and Replacing a DC PDU
  • Removing and Replacing Cards from the Chassis
    • Removing and Replacing Cards from the Line Card and RP Card Cage
    • Removing and Replacing Cards from the Switch Fabric and Alarm Card Cage
  • Removing and Installing a Chassis
    • Removing a Chassis from the Equipment Rack
    • Installing a Replacement Chassis in the Equipment Rack
    • Packing a Defective Chassis for Shipment
• Technical Specifications
  • Router Specifications
• Site Log
• Index