Reinstalling cards in the chassis, Step 2, Step 1 – Cisco XR 12410 User Manual
Page 113: Figure 3-23 opening the air filter door, 2sf c
3-31
Cisco XR 12410 and Cisco XR 12810 Router Installation Guide
OL-17441-01
Chapter 3 Installing the Cisco XR 12410 Router
Reinstalling Cards in the Chassis
Step 2
Go to the
“Reinstalling Cards in the Switch Fabric and Alarm Card Cage” section
to reinstall SFCS cards.
Reinstalling Cards in the Chassis
This section describes how to reinstall various line cards back into the chassis.
Reinstalling Cards in the Switch Fabric and Alarm Card Cage
Use the following procedure to reinstall cards into the switch fabric and alarm
card cage (refer to
for slot numbering).
Step 1
Loosen the two captive screws on each side of the air filter door and swing the
door away from the switch fabric and alarm card cage (
).
Figure 3-23
Opening the Air Filter Door
ALARM
2
SF
C
OCESSOR
53272
-3/STM-POS
6DS3–SMB P
/
H
/
F
12DS3–SMB P
/
H
/
F
-48/STM-16-SCPOS
OC-12/STM-4 A
T
M
ST ETERNET
E PR
OCESSOR
PR
OCESSOR