Cisco XR 12410 - Manual (Page 65)

2-15
Cisco XR 12410 and Cisco XR 12810 Router Installation Guide
OL-17441-01
Chapter 2 Preparing for Installation
Site Requirement Guidelines
Table 2-1 lists power cord options. All AC-input power supply power cords
measure 14 feet (4.3 m).
DC-Powered Routers
Connections to DC PEMs are rated at 60 A maximum. A dedicated,
commensurately rated DC power source is required for each PEM connection.
For DC power cables, we recommend that you use a commensurately rated,
high-strand-count copper wire cable. Connection to the DC power distribution
unit (PDU) requires one earth ground cable and two cable leads; a source DC (–)
and source DC return (+) for each PDU (2 PDUs x 3 = 6 cables).
The length of the cables depends on your router location from the source power.
Note DC power cables are not available from Cisco, but are available from any
commercial cable vendor.
Table 2-1 AC Power Cord International Options
Label Description Part Number
North America 20 A, 250 VAC CAB-GSR16-US=
Australia, New Zealand 15 A, 250 VAC CAB-GSR16-AU=
Europe, Argentina, Brazil 16 A, 250 VAC CAB-GSR16-EU=
Italy 16 A, 250 VAC CAB-GSR16-IT=
United Kingdom 13 A, 250 VAC
(13 A replaceable fuse)
CAB-GSR16-UK=