Cisco XR 12410 - Manual (Page 97)

3-15
Cisco XR 12410 and Cisco XR 12810 Router Installation Guide
OL-17441-01
Chapter 3 Installing the Cisco XR 12410 Router
Rack-Mounting the Router Chassis
Step 2 Starting at slot CSC0:
a. Pivot the ejector levers to unseat the card from the backplane connector
(
Figure 3-10 ).
b. Slide the card out of the slot and place it directly into an antistatic bag or other
ESD-preventive container.
Figure 3-10 Removing a Card from the Switch Fabric and Alarm Card Cage
Step 3 Repeat Step 2 for each card.
Step 4 Close the air filter door and tighten the captive screws to prevent the door from
opening during the chassis installation.
Rack-Mounting the Router Chassis
The router chassis can be installed in either a front-mounted position or a
center-mounted position as shown in
Figure 3-11 .
ALARM 2 SF C
53270
Air filter door
-3/STM-POS 6DS3–SMB P
/ H / F
12DS3–SMB P
/ H / F
-48/STM-16-SCPOS OC-12/STM-4 A
T M
ST ETERNET E PR
OCESSOR
Clock scheduler card