Using the ceiling mount – Compaq MP1200 User Manual
Page 35
Compaq iPAQ Microportable Projector MP1200 User’s Guide
4–1
4
Using the Ceiling Mount
The projector includes ceiling mount capability on the bottom of
the projector. This allows the projector to be mounted from the
ceiling using any ceiling mount bracket that matches the screw
hole configuration on the projector.
An optional ceiling mount bracket with the correct screw hole
configuration is available from Compaq. The kit also includes
15 foot cables. For information on purchasing the optional ceiling
mount bracket kit, call your Compaq authorized dealer or reseller.
To locate a reseller near you, refer to the Worldwide Telephone
Numbers booklet that came with your projector or, to purchase
directly from Compaq, refer to the Compaq website at
http://www.compaq.com/products/projectors.
Å
WARNING:
The ceiling mount bracket should be capable of supporting
a weight of at least seven pounds. Refer to the owner’s manual that
came with your ceiling mount bracket for more information.
Ä
CAUTION:
Do not overtighten the ceiling mount screws. Doing so could
strip the screws and cause the projector to fall off the ceiling mount
bracket.
261799-001.book Page 1 Thursday, April 25, 2002 3:13 PM