Compaq MP1200 - Manual (Page 55)

7–6 Compaq iPAQ Microportable Projector MP1200 User’s Guide
Care and Maintenance
After the lamp module has been replaced, reset the lamp hours in
the on-screen display menu to prevent the “Lamp May Fail Soon.
Replacement Suggested” message from appearing again. To reset
the lamp hours:
1. Be sure the projector is turned off.
2. Make sure all connections except the power cable are
disconnected.
3. Press and hold the Menu button on top of the projector while
turning the projector on.
4. Connect the VGA cable to the projector. The OSD menu will
appear, and “Service” will now be displayed as an option in
the Main menu.
5. Select Service and press the Enter/Acce pt button on the top of
the projector.
6. Select Reset Lamp Hours from the Service menu and press
the Enter/Accept button.
7. Select Yes from the Confirm Reset menu and press the
Enter/Accept button.
8. Select Save and Return.
261799-001.book Page 6 Thursday, April 25, 2002 3:13 PM