Connecting stereo speakers – Compaq MP1200 User Manual
Page 47
Advertising
Using the Home Theater Kit
Compaq iPAQ Microportable Projector MP1200 User’s Guide
6–7
Connecting Stereo Speakers
1. Connect one end of the VGA cable that came with the
projector to the VGA-in connector 1 on the side of the
projector.
2. Connect the other end of the VGA cable to a personal
computer (PC) with DVD capability 2.
3. Connect the dual end of the Home Theater audio cable 3 to a
receiver attached to stereo speakers.
4. Connect the single end of the Home Theater audio cable 4 to
the audio connector on the PC.
261799-001.book Page 7 Thursday, April 25, 2002 3:13 PM
Advertising