Tomei Powered ARMS M8280 User Manual
Page 20
Advertising
1. REMOVAL OF THE STOCK TURBINES.
Disconnect the car battery's negative terminal. Then follow the Toyota service manual to remove the stock turbine.
The illustration below shows the parts (marked with an "x") that should NOT be reused.
Exhaust Manifold
Heat Insulator
(Heat Sheild)
Exhaust Manifold
Turbo Charger
Air Tube No.2 W/Air Hose
Air Filter Hose
Air Tube No.1
Ч
Ч
Ч
Ч
Ч
Please be careful not
to damage the parts
that you will re-use.
20
2. Installing Auxilary Items
2-1 Engine Side
2-1-1
Install the Oil Line inlet & Copper Washer (Part ④-2) to the Engine Blocks Oil Line Inlet.
(Part ④-6).
【Torque Specs : T=31.4N・m (3.2kgm)】
20
Advertising