Vermont Casting Gas Grill - Manual (Page 14)

14
Assembly Step 5 - Attach the Side Tables
Tools Needed:
LOCATE THESE PARTS:
Side Burner
Table Assembly
USE HARDWARE PACK D :
M6x1x16mm
Bolt (8)
Flat
Washer (8)
Lock
Washer (8)
Phillips head screwdriver
1.
2.
3.
4.
Starting with the Side Burner
Table Assembly, line up the
mounting holes with the
corresponding holes in the
side of the Grill Head as
shown.
For each pre-threaded
mounting hole, insert a
bolt, washer, and lock
washer.
Firmly tighten the bolts.
Repeat steps 1 through 3 for
the Right Side Table.
Side Table