Step 2: setting the time, To change the preset time – Sony LBT-G2500 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 2: Setting the
time
You must sol tho time before using the timer
functions.
You can set the time while the power is off.
For European models, the clock is on a
24-hour system.
For other models, the clock is on a 12-hour
(AM / PM) system.
Tlie 24-hour system model is used for
illustration purpose.
1
Press 0/CL(3CK SET.
The hour indication flashes.
2
Press TUNING -i- /- to set the hour.
3
Press ENTER/NEXT.
The minutes indication flashc-s.
^ n rr
/9
4
Press TUNING
+ / -
to set the
minutes.
5
Press ENTER/NEXT.
The clock starts working.
To change the preset time
You can also change the time while the power
is on.
1
Press ©/CLOCK SET.
2
Press TUNING +/- repeatedly until
"SET CLOCK" appears, then press
ENTER/NEXT.
3
Repeat steps 2 to 5 in "Setting the time".
Tips
• If you've made a mistake, start over from step 1.
• Setting the time deactivates the demonstration
mode.
If you want to display the demonstration mode,
press DISPLAY/DEMO when the power is off.