Hookups, Connecting the deck to an amplifier, Notes – Sony MDS-S37 User Manual
Page 5: Connecting the ac power cord
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Getting Started
Hookups
• Connecting the deck to an amplifier
Connect the amplifier to the LINE (ANALOG) IN/OUT
jacks using the audio connecting cords (supplied), making
sure to match the color-coded cords to the appropriate
jacks on the components: red (right) to red and white (left)
to white. Be sure to make connections firmly to prevent
hum and noise.
MD deck
Amplifier
■=^: Signal flow
Connecting the deck to a digital component such as a
CD player, DAT deck, digital amplifier, or another MD
deck
Connect the component through the DIGITAL IN/OUT
connectors with two optical cables (not supplied). Take
the caps off the connectors before plugging in the cables.
MD deck
Digital component
Signal flow
Q' Automatic conversion of digital sampling rates
during recording
A built-in sampling rate conv'erter automatically
con\’erts the sampling frequency of various digital
sources to the 44.1 kHz sampling rate of your MD deck.
This alknvs vou to record sources such as 32- and 48-
kHz DAT or satellite broadcasts, as well as compact
discs and other MDs.
Notes
• If "Din Unlock" or "Cannot Copy" appears in the display,
recording through the digital connector is not possible.
In this case, record the program source through the LINE
(ANALOG) IN jacks with INPUT set to ANALOG.
• When recording through the DIGITAL IN connector, you
cannot adjust the recording level.
Connecting the AC power cord
Connect the AC power cord to a wall outlet.