Sony SPP-SS961 - Manual (Page 16)

Receiving calls
1
— 2
When you hear the phone ring,
pick up the handset from the
base unit, and press ( talk ) .
"TALK" appears on the display.
When you're done talking, press
(OFF) or replace the handset on
the base unit.
The display goes off.
If vou have subscribed to the Caller ID service;
• the caller's number and /or name appears on the display when you receive a
call (see page 24)
• the ringer sound changes to a higher tone if the call matches the number
stored on ONE-TOUCH DIAL buttons or in the Phone Directory (memory
match function; see page 24).
To switch to another call ("call waiting" service*)
Press ( CALL WAITING/FLASH).
Press the button again to get back to the first caller.
‘ Contact your telephone company to subscribe to this service.
To save battery power
Set the RING ON/BATT SAVE switch on the bottom to
ВАТТ SAVE.
The handset won't ring. You can still make calls, and
also receive calls if another telephone connected to the
same line rings to inform you on incoming calls, but
vou can't page the handset from the base unit.
Note
You cannot receive Caller ID data when the handset is
off the base unit in ВАТТ SAVE mode. See page 24 for
details.
RING ON/BATT
SAVE switch
16
^'
Basics