To change a stored number, Making calls with one-touch dialing, To check the phone number before one-touch dialing – Sony SPP-SS961 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
One-touch dialing (continued)
Note
i)o not allow more than 20 seconds to elapse between each step of the
procedure.
Tips
• If you have entered a wrong number in step 3 and have not pressed
^
pgma
/
o
TD (step 4) yet, just turn Jog Dial down to erase it. Then enter the
correct number.
• You may press jog Dial instead of C
pgma
/OL ) in step 4.
To store a number to be dialed via Private Branch Exchange
(PBX)
Before entering a phone number in Step 3 on page 17, do as follows:
1
Enter the outside line access digit (e.g., 9).
2
Press (PAUSE).
To change a stored number
1
Press (PGMA/OL).
2
Press one of the ONE-TOUCH DIAL buttons ((A) to fcT).
The current number appears on the display.
3
Turn jog Dial down to erase the current number.
4
Enter a new number.
5
Press
(
PGMA/OL).
Note
You can replace the stored number with a new number, but you can't just erase it.
Making calls with one-touch dialing
1
Press (TALK) and wait until “TALK" appears on the display.
2
Press one of the ONE-TOUCH DIAL buttons
(C
a
)
to (cT).
The phone number stored on the one-touch dialing button
will appear on the display and will be dialed.
To check the phone number before one-touch dialing
While the handset isn't in use, press one of the ONE-TOUCH DIAL
butto-.s ) to Cc )).
The number stored on the button appears on the display for five
seconds. To dial the number, press (
talk
) while the number is
displayed.
18
"
Telephone Features