Sony CDP-C77ES - Manual (Page 24)

Assigning Names to a Disc-Disc Memo
DOOS
1
Make sure that the total number of selections and
the total playing time are displayed. Then proceed
as follows in the stop mode.
Using the MEMO INPUT button with the letter
buttons on the remote commander
(This function can be entered while playing)
1
*U «9
" T- I
Each time you press MEMO INPUT, the display
changes as shown above. Choose the desired
capital letters, or numbers.
2
Press the applicable letter button.
OISC I
à
&
fTi fî» <îi lî» tîi }U
mnm , X
Move the cursor to select the next letter.
To change to numbers, return to the step [A] -1.
d] Using the buttons
1
I » >
(b
Press or until the desired letter
appears.
Example: if
»■ is pressed 7 times, F appears.
2
When the desired letter appears, press
CSZUSD
6
«scs ,
X* 'Ï- !• i Î * /
Move the cursor to select the next letter.
Repeat steps[1]-1 and(Bj-2.
CrP
6
X -I * ! ¿*’ •* ‘
Lights up.
After
2
ibout 1 second, the memo you have written
will be displayed.
Each time the disc is put in the unit the memo will
be displayed.
Note
Symbols cannot be entered with the letter buttons on the remote
commander. To enter symbols, use buttons.
24