Sony MDS-JE700 - Manual (Page 20)

II
Playing MDs
Checking remaining time and the title of a
track
Each time you press DISPLAY while playing an MD,
you can change the display as shown below. The track
numbers in the music calendar disappear after they are
played.
V
Track number and playing time of the
current track
2
f''! ■ j.
^ Press
Track number and remaining time of
the current track
2 3 4 5
- 1 p’l 2 5s •' •
o Press
Track name
D I H R V
2 3 4 5
If no title is recorded, "No Name" appears,
followed by the elapsed playing time.
Press [L
'Q' You caft check the track name at any time while
playing an MD
Press SCROLL/CLOCK SET (or SCROLL).
Since the display shows up to 12 characters at a time,
press SCROLL/CLOCK SET (or SCROLL) again to see
the rest of the track title if the title has 13 characters or
more.
Press SCROLL/CLOCK SET (or SCROLL) again to
pause scrolling, and again to continue scrolling.
Checking the recording date
When the internal clock has been set, the deck
automatically records the recording date and time of
all recordings. You can then check the recording date
and time of a track.
1
Locate the track for which you want to check the
recording date and time.
When the deck is Press
stopped
playing or in playback
pause
or number buttons
Press DATE RECORDED.
"No Date" appears if the internal clock has not
been set or the track was recorded on another MD
deck without a date and time stamp function.
Locating a Specific Track
You can quickly locate any track while playing a disc
by using AMS (Automatic Music Sensor),
and
1, number buttons or M.SCAN on the remote.
Number
buttons
M.SCAN
20
To locate Do the following:
The next or
succeeding tracks During playback, turn AMS clockwise
(or press repeatedly) until you
find the track.
The current or
preceding tracks During playback, turn AMS
counterclockwise (or press
repeatedly) until you find the track.
A specific track
directly U] Press number buttons to enter the
track number.
A specific track by
using AMS 1 Turn AMS until the track number
you want to locate appears while
the deck is stopped. (The track
number is flashing.)
2 Press AMS or l>.
By scanning each
track for 6 seconds
(music scan) 1 Press M.SCAN before you start
playing.
2 When you find the track you want,
press to start playing.