Document Outline

• Mini Disc Deck
  • WARNING
    • For the customers in the U.S.A.
    • For the customers in Canada
  • Welcome!
  • About This Manual
    • Conventions
  • Getting
  • Started
    • Before You Start the Hookup
      • Checking the supplied eceessories
      • Inserting batteries into the remote
    • Hooking Up the Audio Components
      • Required cords
      • Things you should keep in mind while hooking up the system
      • Jacks (connectors) for connecting audio components
      • Setting the voltage (only on models supplied with a vottagp selector)
      • Connecting the AC power cord
  • ff
    • Remote Parts Description
    • Using the Display
      • When you insert an MD
      • a
        • n
      • Using the Display
      • While ^ de<ic is stopped
        • Press LEVEL/DISPLAY/CHAR (or DISPLAY) repeatedly to change the display.
      • While the deck is playing
        • Press LEVEL/DISPLAY/CHAR (or DISPLAY) repeatedly to change the display.
      • While the deck is recording
        • Press LEVEL/DISPLAY/CHAR (or DISPLAY) repeatedly to change the display.
    • Notes on Recording
      • When "Protected" and "C11" alternate in the display
      • When "Din Unlock" and "C71" alternate in the dispiay
      • When "Cannot Copy" appears in the dispiay
      • When "TRACK" flashes in the display
      • About indications which appear after recording
        • When "TOC" lights up in the display
        • When "TOC Writing" flashes in the display
    • Recording on an MD
      • Automatic conversion of digital sampling rates duHng recording
      • Automatic de-emp||iasiging of input signals for digital recording v
      • Guide to the Serial Copy Management System
        • 9 If necessary, locate the point on the MD to start recording from.
        • To record over from the beginning of an existing MD track
        • To record over from the middle of an MD track
        • 10 Press REC«.
        • 11 If you have set INPUT to ANALOG in step 4 above, adjust the recording level.
        • 12 Press [> or II.
        • 13 start playing the program source.
        • Operations you may want to do during recording
        • To prevent accidental erasure of the recorded material
        • When you pause recording
    • Adjusting the Recording Level
    • Recording Tips
      • Oiedkfng tii«Y(Mna1nii«^4i^rd«bl« time on the MD
      • Monitoring the input signai (Input Monitor)
      • Erasing blank portions automutically (Smart Space/Auto Cut)
        • Smart Space
        • Auto Cut
        • 1 While the deck is stopped, press MENU/NO twice.
        • 2 Turn AMS (or press repeatedly) until
        • "S.Space" appears, then press AMS or YES.
        • 3 Turn AMS (or press /►►! repeatedly) to select the setting, then press AMS or YES.
        • 4 Press MENU/NO.
    • Marking Track Numbers While Recording (Track Marking)
      • Marking track numbers manually (Manual TYack Marking)
        • Press REC • at the point where you want to add a track number while recording.
      • Marking track numbers automatically (Automatic li’ack Marking)
        • 1 While the deck is stopped, press MENU/NO twice.
        • 2 Turn AMS (or press W^/^W repeatedly) until "T.Mark" appears, then press AMS or YES.
        • 3 Turn AMS (or press h*4/^W repeatedly) to select the setting, then press AMS or YES.
        • Select
        • Press MENU/NO.
    • Starting Recording With Six Seconds of Prestored Audio
      • Data (Time Machine Recording)
    • Synchro-recording With the Audio Component of Your
      • Choice (Music Synchro-recording)
        • To stop Music Synchro-recording
    • Synchro-recording With a Sony CD Player
      • (CD Synchro-recording) j~Tl
      • o
      • Synchro-recording With a Sony CD Player (CD Synchro-recording)
        • Operations you may want to do during CD Synchro-recording
    • Playing MDs
      • 1 Turn on the amplifier and select MD on the amplifier.
      • 2 Press l/(!) to turn on the deck.
      • 3 Insert an MD.
      • 4 If necessary, turn AMS (or press repeatedly) to locate the track you want to start playing from.
      • 5 Press O.
      • 6 Adjust the volume on the amplifier.
      • Operations you may want to do during play
      • Playing a Specific Track
        • 3
        • Locating a track with AMS*
        • Playing a track by entering the track number [D
          • Press the number button(s) to enter the number of the track you want to play.
          • To enter a track number over 10
          • 1 Press >10 (see the examples below).
          • 2 Enter the corresponding digits.
      • Locating a Particular Point in a Track
        • Locating a point whiie monitoring the sound
          • Press down during play.
        • Locating a point by observing the time indication
      • Playing Tracks Repeatedly
        • Press down during play pause.
        • To resume normal play
        • To stop Repeat 1 Play
        • To resume normal play
        • Repeating a specific portion within a track (Repeat A-B Play) [f]
          • To stop Repeat A-B Play and resume normal play
      • Playing Tracks in Random Order (Shuffle Play)
        • To resume normal play
        • Programming the tracks
        • Checking the contents of the program
        • Changing the contents of the program
      • Tips for Recording From MDs to Tape
        • Inserting blanks between tracks during play (Auto Space)
          • 1 While the deck is stopped, press MENU/NO twice.
          • 2 Turn AMS (or press I«/►» repeatedly) until "Auto" appears, then press AMS or YES.
          • 3 Turn AMS (or press !◄◄/►►! repeatedly) to select the setting, then press AMS or YES.
          • 4 Press MENU/NO.
        • Pausing after each track (Auto Pause)
          • 1 While the deck is stopped, press MENU/NO twice.
          • 2 Turn AMS (or press repeatedly) until
          • "Auto" appears, then press AMS or YES.
          • 3 Turn AMS (or press repeatedly) to select
          • the setting, then press AMS or YES.
          • 4 Press MENU/NO.
          • To resume play after pausing
          • Note
        • Brief descriptions of buttons and controi used to edit iWIDs
        • About indication which appears while editing
          • When "Protected" appears in the display
        • About indications which appear after editing
          • When "TOC" lights up in the display
          • When "TOC Writing" flashes in the display
      • Erasing Tracks
        • Erasing a track
          • [4]DDD
          • m AAA
          • [T]AAA
          • 1 While the deck is stopped, playing, or paused, press MENU/NO.
          • 2 Turn AMS (or press repeatedly) until "Tr
          • Erase ?" appears, then press AMS or YES.
          • 3 Turn AMS (or press repeatedly) until the
          • track number you want to erase appears.
          • 4 Press AMS or YES.
          • To cancel the operation
        • 3
        • Erasing all the tracks on an MD
          • To cancel the operation
        • Erasing a portion of a track
          • Example: Erasing portion "B2" of the second track
          • To cancel the operation
      • Dividing Tracks
        • Dividing a track after selecting the track
        • Dividing a track after selecting the dividing point
      • Combining Tracks
      • Moving Tracks
      • Naming a Track or MD
        • Naming a track or MD using the controls on the deck
        • c
        • Naming a track or MD using the remote
        • Copying a track or disc name
          • To cancel the operation
        • Renaming a track or MD [X]
          • To cancel the operation
        • Erasing all the names on the MD
          • To cancel the operation
        • Erasing a track or disc name
      • Undoing the Last Edit
        • 1 While the deck is stopped and no track number appears in the display, press MENU/NO.
        • 2 Turn AMS (or press «◄/►►I repeatedly) until "Undo ?" appears.
        • 3 Press AMS or YES.
        • 4 Press AMS or YES.
        • To cancel the operation
  • other
    • Functions
      • Fade In and Fade Out [T
        • Fade-in Play and Fade-in Recording
          • During play pause (for Fade-in Play) or recording pause (for Fade-in Recording), press FADER.
        • Fade-out Play and Fade-out Recording
          • During play (for Fade-out Play) or recording (for Fade- out Recording), press FADER.
      • Falling Asleep to Music
        • (Sleep Timer)
    • Additional
    • Information
      • Precautions
        • On safety
        • On power sources
        • On condensation in the deck
        • On the MiniDisc cartridge
        • On cleaning
        • a
        • a
      • Handling MDs
      • System Limitations
      • Troubleshooting
        • The deck does not operate or operates poorly.
        • The deck does not play.
        • The sound has a lot of static.
        • The deck does not record.
        • The deck does not perform Synchro-recording with a CD player or video CD player.
        • A message and a three-digit alphanumeric code alternate in the display.
      • Specifications
        • General
        • Supplied accessories
        • Optional accessories
      • Display Messages
      • Setup Menu Table
        • To access the Setup Menu
        • To recall a factory setting
      • Self-Diagnosis Function
        • o’
        • o
        • o'
        • Three-digit code/Message Cause/Remedy
      • Index