Connecting other equipment – Sony KV-27V55 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting Other Equipment
Video Equipment
After connecting, you will be able to...
— Play back video tapes
— Watch two TV programs at once using a window picture
(Picture-in-Picture, pp. 38-43)
Connecting a VCR with an S video output jack (except for KV-13V50)
Rear of TV
If you connect a monaural VCR, connect the audio output of the
VCR to the L (MONO) jack of VIDE011N on the TV.
The monaural sound will be heard from both speakers.
For operating instructions, refer to the instruction manual
furnished with the VCR.
if the picture or sound is affected, move the VCR away from the
TV.
If S VIDEO is set to OFF, you cannot watch VCR piayback
pictures from the 8 VIDEO IN.
To set S VIDEO to ON, see *Watching a Video with Your S
Video-Equipped VCR*, p. 28.
About S video input
Video input and output signals can be separated into Y
(luminance or brightness) and C (chroma or color) signals.
Usually these two signals are combined in a VCR and sent
as one signal to a TV. Separation of the Y and C signals
prevents them from interfering with one another, thereby
inproving picture (especially color) quality.
This TV is equipp^ with an S video input jack through
which these separated signals can be input directly. This
way you can connect your S video-equipped VCR
separately from a non-S video VCR.
22
Chapter 1: Setting Up