Preparing for use, Operating your equipment (except for kv-13v50) – Sony KV-27V55 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting video equipment not equipped with an S video output jack
Rear of TV
KV-27V56
1
4
ÇÜT
«BB>1
VBtOS
©
#
—
#
#
#
to VIDEO ^kwv)
to AUDIO-L (white)
toAUDIO-R(ted)
toVHFAJHF
; Signal flow
VM0810S/820S
(not supplied)
to audio output
to video output
VHF/UHF output
VCR
I
S
B
1
Preparing for use
1
Turn on the TV.
2
Press the TVAdDEO button on the TV or on the Remote
Commander so that VIDEO appears on the screen.
When you cannot obtain a clear picture and/or sound
Make sure that the TV/VTR on the VCR is set to TV.
Reselect the channel you want to view with the controls on
the TV or the Remote Commander.
Operating your equipment (except for KV-13V50)
When using a Sony VCR, Multi-disc player or other
manufacture’s infrared remote control VCR. you can operate
most of the equipments by using the supplied pre
programmed Remote Commander (p. 55).
To return to TV mode
Press the TV or TV/VIDEO button so that a channel number
appears on the screen.
Chapter 1 ; Setting Up
23