Sony STR-DE335 - Manual (Page 10)

Getting Started
AC Hookups
Connecting the AC power cord
Connect tlie AC power cord from this receiver and
from your audio/video components to a wall outlet.
If you connect other audio components to the
SWITCHED AC OUTLET on the receiver, the receiver
can supply power to the connected components so you
can turn on/off the whole system when you turn on/
off the receiver.
SWITCHED AC OUTLET
Caution
Make sure that the power consumption of the component
connected to the receiver's AC outlet does not exceed 120
watts. Do not connect high-wattage electrical home
appliances such as electric irons, fans, or TVs to this outlet.
Where do I go next?
Before you use the receiver, go to the next section to make
sure that all the controls are set to the appropriate positions.
Before You Use Your Receiver
Before turning on the receiver, make sure that you
ha\’e:
• Turned MASTER VOLUME to the leftmost
position (0).
• Selected the appropriate speaker system. (See
"Selecting the speaker system" on previous page.)
• Set BALANCE to the center position.
Before )' 0 u use your receiver for the first time or when
\’ou want to clear the receiver's memory, do the
procedure below:
l/c!) (power)
MUTING
1
2
Turn off the receiver.
Press I / (I) (power) for more than 4 seconds.
"INITIAL" appears in the display and the items
including the following are reset or cleared:
• All preset stations are reset to their factory
settings.
• All sound field parameters are reset to their
factory settings.
• All index names (of preset stations and program
sources) are cleared.
• All adjustments made with the SET UP button arc
reset to their factory settings.
• The sound field memorized for each program
source and preset station is cleared.
Turn on the receiver and check the following indicator
• Press MUTING or MUTING on the remote if the
MUTING indicator turns on.
10