Canon IXUS 990IS - Manual (Page 14)

14
Use the included charger to charge the battery.
Remove the cover.
Insert the battery.
● Align the marks on the battery and
charger, then insert the battery by sliding it
in
and down .
Charge the battery.
● For CB-2LX: Flip out the plug and plug
the charger into a power outlet .
● For CB-2LXE: Plug the power cord into
the charger, then plug the other end into a
power outlet.
The charge lamp lights red and charging
starts.
● The charge lamp will light green when
charging has finished. Charging takes
approx. 2 hours and 5 minutes.
Remove the battery.
● Unplug the battery charger from the power
outlet, then remove the battery by sliding it
in
and up .
Charging the Battery
To protect the battery and prolong its life, do not charge it for longer than
24 hours continuously.