Canon IXUS 990IS - Manual (Page 129)

Selecting Images for Printing (DPOF)
129
Set the number of prints.
● Press the
op buttons or turn the  dial
to set the number of prints (maximum 99).
● Repeat Steps 2 and 3 to select other
images and the number of prints for each.
● You cannot set the number of print copies
for Index prints. You can only select which
images to print in Step 2.
Pressing the
n button accepts the
settings and restores the menu screen.
Select Range
Select [Select Range].
● Select [Select Range] in Step 1 on p. 128
and press the m button.
● Select images according to Steps 2 and 3
on
p. 114 .
Make print settings.
● Press the op buttons, select [Order] and
press the
m button.
Set All Images to Print Once
Select [Select All Images].
● Select [Select All Images] from the screen
in Step 1 on
p. 128 and press the
m
button.
Make print settings.
● Press the
qr buttons or turn the  dial,
select [OK] and press the m button.