Canon IXUS 990IS - Manual (Page 141)

141
In the 3 tab, you can set one of your recorded images as the start-up image
when the camera power is turned on, or change the sounds played for each
camera operation with your recorded sounds.
Change Sounds
● Select [Sound Options], then press the m
button.
● Press the op buttons or turn the  dial
to select an option.
● Press the qr buttons to change the sound.
Changing the Start-up Screen
● Select [Start-up Image], then press the
m
button.
● Press the qr buttons to change the image.
Changing the Start-up Image or Sound
1 Preset sound.
2
You can register your sounds using the
supplied software (ZoomBrowser EX/
ImageBrowser)
(p. 142) .
X No start-up image.
1 Preset image.
2
You can register images that you have
taken.