To cancel the a-b erase function, Notes, Dividing recorded tracks (divide function) – Sony MDS-S38 User Manual

Page 26: Fi m s, Editing recorded mds

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Editing Recorded MDs

7

Press YES or AMS when point A is correct.

After "Point B Set" appears for a few seconds,
" ► " and "A-B" start flashing, and playback

begins so that you can set point B.

8

Continue playing the track or press ► ► until you

reach the ending point (point B) of the portion to
be erased, then press YES.

"Rehearsal" alternates with "Point B ok?" in the
display, and the "spliced" portion of the track
(after^the portion from point A to B has been
erased) plays back repeatedly, starting a few
seconds before point A and ending a few seconds
after point B.

9

If point B is incorrect, press EDIT/NO. (If it is

correct go to Step 12.)

10

while

monitoring the sound, turn AMS to find

point B.
"Rehearsal" alternates with "Point B ok?" in the

display, and the "spliced" portion of the track
(after the portion from point A to B has been

erased) plays back repeatedly.

Point B can be moved within a maximum range of

-128 to +127 steps of about 0.06 second each
within a track.

11

If point B is still incorrect, repeat Step

correct.

10 until it is

12

Press YES or AMS when point B is correct.

When the portion from point A to B has been
erased, "Complete" appears for a few seconds.

To cancel the A-B Erase Function
Press ■ .

Notes

• If "Impossible" appears in the display, point B was

specified before point A. Specify point B so that it comes
after point A.

• If "Sorry" appears in the display, a portion of the track

cannot be erased. This sometimes happens when you've
edited the same track many times, and is due to a
technical limitation of the MD system, not a mechanical
error.

Dividing Recorded Tracks

(Divide Function)

With the Divide Function you can assign a track
number at places that you want to randomly access
afterwards. Use this function to add tracks to MDs
recorded from an analog source (and therefore contain
no track numbers), or to divide an existing track into
multiple portions. When you divide a track, the total
number of tracks on the MD increases by one and all
tracks following the divided track are renumbered.

Example: Dividing track 2 to create a new track for C

1

2

3

Track _
number

Dividing

O

A

B

C

D

ll

2

Track 2 is divided and a
new track is created for C

3 4

B

C

ODD

1

While playing the MD, press CHID (or II) at the

point where you want to create a new track.
The deck pauses playing.

2

Press EDIT / NO repeatedly until "Divide ?"

appears in the display.

3

Press YES to divide the track.

"Rehearsal" alternates with "Posihon ok?" in the
display, the track to be divided starts flashing in
the music calendar, and the starting portion of the
new track begins playing repeatedly.

4

If the starting position is incorrect, press EDIT/

NO. (If it is correct, go to Step 7.)

fi M s

ik-

7

It

10

11 13 13 14 IS

(Ml .«-n .< .c

2

&

Advertising