Unpacking, Inserting batteries into the remote, Notes – Sony MDS-S38 User Manual
Page 4: Hooking up the system, Overview, What cords will i need, Unpacking hooking up the system
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Unpacking
Check that vou received the fodowing items;
• Audio connecting cords (2)
• Optical cable (1) (except for US model)
• Remote commander (remote) RM-D7M (1)
• Sony SUM-3 (NS) batteries (2)
Inserting batteries into the remote
You can control the deck using the supplied remote.
Insert two R6 (size-AA) batteries by matching the +
and - on the batteries. When using the remote, point it
at the remote sensor
19
on the deck.
'Q' When to replace batteries
With norma) use, the batteries should last for about six
months. When the remote no longer operates the deck,
replace all the batteries with new ones.
Notes
• Do not leave the remote near an extremely hot or humid
place.
• Do not drop any foreign object into the remote casing,
partirularly when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
• If you don't use the remote for an extended period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
Hooking Up the System
Overview
This section describes how to hook up the MD deck to
an amplifier or other components such as a CD player
or DAT deck. Be sure to turn off the power of each
component before connection.
REC
OUT
to a wall outlet
(or to a timer during timer
recording or playback)
TAPE
IN
Amplifier
Connect only
I
one digital !"
component at ■
a time.
DIGITAL
OUT
CD player
DIGITAL
OUT
Signal flow
DIGITAL
IN
DAT deck or
MD deck, etc.
What cords will I need?
► Audio connecting cords (supplied) (2)
* Optical cables (only one supplied*) (2)
* The optical cable is not supplied on US model.
■diins