Control a1 ii hookup, Connecting the ac power cord – Sony STR-DE635 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CONTROL A1

II

hookup

• If you have a CONTROL A1 ll compatible Sony

CD player, tape deck, or MD deck

Use a CONTROL A1 cord (not supplied) to connect the
CONTROL A1 or CONTROL A1 II jack on the CD
player, tape deck, or MD deck to the CONTROL A1 II
jack on the receiver. Refer to the separate manual
"CONTROL-Al II Control System" and the operating
instructions supplied with your CD player, tape deck,
or MD deck for details.

Note
If you make CONTROL A1 II connections from the receiver to
an MD deck that is also connected to a computer, do not
op>erate the receiver while using the "Sony MD Editor"
software. This may cause a malfunction.

• If you have a Sony CD changer with a

COMMAND MODE selector

If your CD changer's COMMAND MODE selector can
be set to CD 1, CD 2, or CD 3, be sure to set the
command mode to "CD 1" and connect the changer to
the CD jacks on the receiver.
If, however, you have a Sony CD changer with VIDEO
OUT jacks, set the command mode to "CD 2" and
connect the changer to the VIDEO 2 jacks on the
receiver.

Connecting the AC power cord

Before connecting the AC power cord of this receiver to a
wall outlet:

• Connect the speaker system to the receiver (see page

13).

• Turn the MASTER VOLUME control to the leftmost

position (0).

Connect the AC power cord(s) of your audio/video
components to a wall outlet.

If you connect other audio/video components to the AC
OUTLET(s) on the receiver, the receiver will supply power
to the connected component(s), allowing you to turn the
whole system on or off when you turn the receiver on or
off.

Caution
Make sure that the total power consumption of the component(s)
connected to the receiver's AC OUTLET(s) does not exceed the
wattage stated on the rear panel. Do not connect high-wattage
electrical home appliances such as electric irons, fans, or TVs to
this outlet.

Note
If the AC power cord is disconnected for about two weeks, the
receiver's entire memory will be cleared and the demonstration
will start.

0

0

?r

5*

c

■ o

n

o

3

■ o

o

3

m

3

11

Advertising