Sony STR-DE635 - Manual (Page 8)

Digital Component Hookups
Connect the digital output jacks ot vour DVD plaver (etc.)
to the receiver's digital input jacks to bring the multi
channel surround sound ot a movie theater into \ our
home. To enjov tull ettect ot multi channel surround
sound, five speakers (two tront speakers, two rear
speakers, and a center speaker) and a sub wooter are
required. You can also connect an LD player with an RF
OUT jack \'ia an RF demodulator, like the Sonv MOD-RFl
(not supplied).
Required cords
Optical digital cords (not supplied)
Black Black
Coaxial digital cord (not supplied)
Yellow lililí^ =011111 0» Yellow
Audio/video cords (not supplied)
Wlien amnccting a cord, be sure to niatch the color-coded pins to
the appropriate jacks on the components.
recommended to make digital audio connections to the coaxial jack.
Example of LD player connected via an RF demodulator
Please note that you cannot connect an LD player's AC-3 RF OUT jack directly to this unit's digital input jacks. You must
first convert the RF signal to either an optical or coaxial digital signal. Connect the LD player to the RF demodulator, then
connect the RF demodulator's optical or coaxial digital output to this unit's OPTICAL or COAXIAL DVD/LD IN jack.
Refer to the instruction manual supplied with your RF Demodulator for details on AC-3 RF hookups.
Note
When making connections as shown above, be sure to set INPUT MODE ([^ on page 23) manually. This unit may not operate correctly if
INPUT MODE is set to "AUTO."