Multi channel surround setup, Specifying the speaker parameters, 1 press l/c!) to turn on the receiver – Sony STR-DE635 User Manual

Page 16: 2 press set up, Front speaker size (front), Note

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Multi Channel Surround
Setup

For the best possible surround sound all speakers should

be the same distance from the listening position

(O)

(However, this unit lets vou to place the center speaker up
to 5 feet (1.5 meters) closer (©) and the rear speakers up

to 15 feet (4.5 meters) closer (©) to the listening position.

The front speakers can be placed from 3 to 40 feet (1.0 to

12.0 meters) from the listening position {©).)

You can place the rear speakers either behind \ ou or to

the side, depending on the shape of vour room (etc.).

When placing rear speakers to your side

Specifying the speaker parameters

1 Press l/c!) to turn on the receiver.

2

Press SET UP.

3

Press the cursor buttons

(<

or

»

to select the

parameter you want to adjust.

4

Turn the jog dial to select setting you desire. The

setting is entered automatically.

5

Repeat steps 3 and 4 until you have set all of the

parameters that follow.

■ Front speaker size (FRONT)

Initial setting ; LARGE
• If you connect large speakers that will effectively

reproduce bass frequencies, select "LARGE". Normally,
select "LARGE".

• If the sound is distorted, or you feel a lack of surround

effects when using multi channel surround sound,
select "SMALL" to activate the bass redirection circuitry
and output the front channel bass frequencies from the
sub woofer.

• When the front speaker is set to "SMALL", the center

and rear speakers are also automatically set to
"SMALL" (unless previously set to "NO").

When placing the rear speakers behind you

Note
Do not place the center speaker farther away from the listening
position than the front speakers.

16

Advertising