Adjusting the picture and sound, Using the sleep timer – Sony GV-300 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjusting the Picture and Sound
32
Using the SLEEP Timer
You can set the unit to turn off automatically after a certain amount of time, after as short
as 30 minutes or as long as 5 hours, while viewing a TV program, video playback, or while
recording.
Each time you press the SLEEP button, the display will change as follows:
t
5:00
0:30
4:30
1:00
1:30
2:00
2:30
i
3:00
Example: To turn off the TV after 2 hours
1 Make sure the clock is set correctly (page 20).
No indication wilt appear on the screen if the clock is not set.
2
Select the desired time interval by pressing the SLEEP button.
c>
The screen becomes dark.
The normal display will be restored after a few seconds.
The TV will be turned off after 2 hours.
The procedure is the same for tape playback and recording. The tape will s
after the selected time interval.
To car>csl №« SLEEP timer
Press the SLEEP button repeatedly until the display appears.
The SLEEP timer can also be canceled by turning off the unit with
the POWER switch.
1b check the remaining time
Press SLEEP once.
The remaining time is displayed.
The unit will be turned*-
The indication will go off after a few seconds. off after about 1 hour
and 52 minutes.
Note
When you use the unit with rechargeable batteries, the unit may turn
off before the selected time because the batteries are exhausted.
33