Hi ’bl, Nmraawappavmiimaiaiaimapawpiaypacrmooa – Sony GV-300 User Manual

Page 24

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Tb rtwfnd th* tap« «nd ptay R Mek «utomatfcally — Auto play

While pressing the button, press the t> button.

The “AUTD PLAY” indication appears.

IbimitattMipietiir«

Press the LCD ON/OFF button. To restore the picture, press the LCD ON/OFF button again.

1b «(Qti«t th« pictur«

Adjust the BRIGHT, COLOR, and HUE controls (see page 32.)

1b «top friayback at tlw dMirvd tima

Use the SLEEP function.

The unit goes oft at the preset time, (see page 33.)

When a tap* reeonlaci In atarao mode la ptayed back

The '“(S)” indication appears and the STEREO lamp lights up.

To listen to the stereo sound, use the stereo earphones.

Playbatit of tapes recorded In HIS trtdee eyetom

This unit plays back tapes recorded in HiB* video system.

Howrever, please note the following important conditions.

HiB recording will be played back with standard

8

mm picture quality.

This unit cannot record with HiB picture quality.
Noise may appear in the picture when you play back a tape recorded in HiB LP (long play) mode.

*Hi

8

is the

8

mm recording option found on selected high end

8

mm camcorders and decks.

Wriout PtoytMok MadM

-

CRváTAL-CLEAR MIII/«low/plctura

sMich

on U»

To atop the tape for

a moment — Still
picture

To view the alow
playback picture

To locate a particular
point while viewing
the picture —
Picture aearch

To view the picture

at high apaed — FR

picture aearch

During

playback

hi

’bl

During
playback

During
playback

I,

While
rewinding

Whiie fast

forwarding

h

%

To resume normal play­

back, press >. These
modes will be automati­

cally released and play­

back will resume after the

following time intervals;

Still: 5 minutes Slow*;

1

minutes.

When you n
the button, the unit
will return to the
previous mode.

* After normal playback is resumed, thelw button will not function for about 5 seconds.

nMraawappavmiimaiaiaiMapawpiaypacRmooa

Adjust the picture as follows:

suwyrnL «aws?

1 Ptay back the slow motion picture.
2 Press the SLOW/STILL ADJUST ▼, A buttons to adjust the

picture

80

that the noise does rmt appear.

To adjust the upper portion of the picture, press the

A

button. To adjust the lower portion of the

picture, press the ▼ button. The stilt picture is adjusted at the same time.

46

wnennmpiayvaaKfNmufvmvioivaoonanoinar

tv

or monnoc

The horizontal bands appear in the still, slow, picture search and FR picture search modes.

Noise appears in the still and slow modes. To reduce the horizontal bands, press LCD ON/OFF
button to mule the picture of this unit.

Notes on the CRYSTAL-CLEAR still/alow/picture aearch on LCD

Noiseless pictures can be viewed in the still, slow and picture search modes, owing to the

characteristics of the liquid crystal.

47

Advertising