Hi ^nd a titiliid íitdüt—index sesrch, Hap. 1 – Sony GV-300 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Index — to Find the Desired Scene Quickly
['Hi ^nd a titiliid íitdÜt—Index Sesrch
7ZH]
When you know the location or chapter number of the desired index, you can designate a
number to find the desired pari of the tape.
1
Press the INDEX MODE bunon
once during playback or the
playirack pause mode.
iiNoexjioog)
The unit enters the index standby
mode.
2
Press INDEX - / + button
repeatedly until the desired
index number appears on the
screen.
The tape is rewound or fast for
warded to the designated index
number position, then playback
starts.
b
[g ConventtomN index
Example: designating the second index in
the reverse direction
a
1
playback rewind
current position
INDEX
SEARCH 0
STANDBY
Determine the number of indexes between
the current position and the desired index.
Select the appropriate number.
Press + for t> (forward)direction, - for <3
(reverse) direction.
INDEX
SEARCH 2
CHAPTER
SEARCH 7
0
INDEX
CHAP. 3
When playback starts, the indication will
disappear after about 10 seconds.
I
Prerecorded Index lor softisere
Example: designating chapter number 7
current position
current
chapter number-
CHAPTER
SEARCH 1
STANDBY
-^HAP. 1 ^
Select the chapter number referring to the
number on the jacket of the cassette tape.
Press + for a higher number, and - fora
lower number.
c>
When playback starts, the indication disap
pears after about 10 seconds.
To correct the chapter or Index number
When the "CHAP” or "INDEX" indications are displayed, you can correct the number with the
INDEX -/+ button.
Iridex search does not function if an interval between indexes is less than two minutes. Leave an
interval of at least two minutes between indexes.
50
Even with a video software which has prerecorded indexes, the indication is "INDEX SEARCH”
until the tape is played back.
51