Sony MDP-333 - Manual (Page 14)

CB a
PGM fRAME/nMErCLEARl
□
a O
ABC
m m ri~i
D E F
n~i CO CO
rri r~8~i CO
F“! rsn rn
REPEAT CS
o 1=1
S 3
SHUFFLE MONITOR
a IL3-
REPEAT APAUSEi
O a
Q 3
MULTI SPEED
E3 ISD
co”m
AUTO
s
cb
CUSTOM
CO
TV,VOEO M
□ CE]
VOLUME CHANNEL STLL/STEP
rijgi
S 1^ O
ACS/AMS
nai r»»n
STOP PAUSE
Fia. rSR-
1
O 1
To stop playback and remove disc
Identical buttons on the
main unit can also be used.
To switch between digital and analog sound on an
LD
If the LO contains a digital stereo sound signal, the
player automatically sends that to the output jacks.
Pressing the ANALOG button on the Remote
Commander switches to the analog audio signal and
turns the DIGITAL SOUND indicator off.
Press the ANALOG button again to return to digital
sound output.
With certain discs, there may be a difference in
volume between the digital and the analog sound.
Discs with Label
Discs bearing the I CXI label are recorded with the (CXI
noise reduction system, which gives lower noise levels
and higher dynamic range. The [CS indicator lights up
automatically.
Some
lex]
discs do not include the code necessary to
automatically activate the player’s [CX] noise reduction
system. If the ICX| indicator does not light, press the
ICXI button on the Remote Commander to manually
activate the system.
OPEN/
CLOSE
Remove the disc and press the
OPEN/CLOSE button to close the empty
tray.
To play a stereo LD or a second audio
program (SAP) LD
Press the playback ([>) button, then continue to press the
AUDIO MONITOR button to display the following
information.
Press
r
AUDIO
ONITQR
s
L
Reproduced sound Indicator
lights Stereo disc SAP disc
Stereo
Audio signal 1
(left channel)
Audio signal 2
(right channel)
1/L
2/R
Press ^
Left channel
Audio signal 1
(left channel)
1/L
Press ^ 1
Right channel
Audio signal 2
(right channel)
2/R
To temporarily interrupt playback
When playing CAV discs, the sound is
cut off and a still picture is shown. When
playing other discs, the unit enters the
pause mode. To resume playback from
the same point, press the
I I
or t>
button.
To stop playback
Press the l> button to restart playback
from the beginning of the disc.