Tv only, Optional connections – Sony SAT-A3 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TV Only
TV With RF ConnectOF-Only
Some TVs label this jack RF IN,
instead of VHF/UHF IN.
Refer to the illustration below
(SAT-A3 rcccwcr is pictured).
1
Connect the RG-6 cable from the satellite antenna's LNB to the DSS
receiver's SATELLITE IN jack.
2
Connect the DSS receiver's VHE(SAT)/UHF OUT jack to the TV's
VHF/UHF IN jack.
Note
_ A
VHF/UHF connection does not provide stereo sound. To receive stereo
sound, you must use an A/V connection (described on page 13).
3
Connect one end of- the telephone line cord to the DSS receiver's
TEL LINE jack. Connect the other end to your home's modular
telephone outlet. Do not connect to a "wireless" telephone
extension. Since these devices typically do not support high data
rates, it may result in very slow operation or may even prevent
connection with your program provider.
4
Connect one end of the AC power cord to the DSS receiver's AC IN
jack. Connect the plug end to an AC outlet.
Satellite Receiver
Optional Connections
□ If you have a cable input, cable box, or a terrestrial TV antenna,
connect it to the DSS receiver's VHF/UHF IN jack.
□ To connect the DSS receiver to your audio system, use audio cables
to connect the DSS receiver to your audio receiver's AUDIO IN
jacks.
12 Chapter 3: Connecting Your System