Using the on-screen displays: highlight and select, Step 1: highlight, Step 2: select – Sony SAT-A3 User Manual
Page 23: Example; highlight and select, Chapter 4: using the system features 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the On-Screen Displays: Highlight and Select
Shortcut
(SAT-A3 Only)
In many of the on-screen displays you
can move the joystick in eight
directions: left, right, up, down, and
diagonally (up left, up right, down
left, and down right).
All of the features and functions of the DSS receiver can be operated
using a simple, two-step process: Highlight and Select. These two steps
are explained below.
Step 1: Highlight
□ To highlight, move the joystick (SAT-A3) or press the arrow buttons
(SAT-B3) on the remote to move the on-screen
to the
item that you want to select.
Step 2: Select
□ After you've highlighted the item that you want, select it by
pressing the button.
Example; Highlight and Select
1
In the sample menu that follows, moving the joystick up (SAT-A3)
or pressing the button (SAT-B3) moves the highlight from
ITEM 5...
SAMPLE MENU
ITEM 1
ITEM 2
ITEMS
ITEM 4
ITEM 5
ITEMS
ITEM 7
ITEMS
ITEM 9
.. to ITEM 2.
SAMPLE MENU
ITEM 1
ITEM 2
ITEM 3
ITEM 4
ITEMS
ITEMS
ITEM 7
ITEMS
ITEM 9
2
Pressing the button selects ITEM 2.
You can apply this basic operation of highlighting and selecting to
perform any of the system's functions.
Chapter 4: Using the System Features 23