To change the data service for all stations, Changing the default data service, Setting the baud rate – Sony SAT-A3 User Manual
Page 61: Chapter 5: using the options menu 61
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Changing the Default
Data Service
Select one of the following:
To Do This...
Do This ...
Change the data service for the
current station only
Select the data service and then
select RETURN.
Change the data service for all
stations
Select DEFAULT (then see
"Changing the Default Data
Service" below).
Change the baud rate for the DSS
receiver's wide band data port
Select BAUD (then see "Setting
the Baud Rate" below).
Use the DEFAULT button to select a default data service for all stations
that provide data services.
To change the data service for all stations:
1
Select DEFAULT from the Data Services screen.
2
Select a default data service.
The titles of the data services may be
different, based on the service being
provided.
LOW SPEED DATA
DATAI
DATA 2
DATAS
DATAS
DATA 6
DATA?
DEFAULT DATA
DATA 1
DATA 2
DATA3
DATA 4
DATAS
RETURN
BAUD
HELP
Setting the Baud Rate
The baud rates displayed may be different,
depending on which data port is being
used.
To set the baud rate for the DSS receiver's data port:
1
Select BAUD from the Data Services screen.
2
Select a baud rate for the data port.
LOW SPEED DATA
DATAI
DATA 2
DATA3
DATAS
DATA 6
DATA?
I
P I A T A
A
SET BAUD RATE
2400
4800
9600
RETURN
DEFAULT
HELP
Chapter 5: Using the Options Menu 61