Running a system test, To run the system test, Chapter 6: using the setup menu 75 – Sony SAT-A3 User Manual

Page 75

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Running a System Test

The System Test lets you check the integrity of your system's
components, including:

□ Antenna signal

□ System tuning

□ Phone line

□ Access card

Use-the System Test if you are experiencing problems with your
system.

To run the System Test:

1

Select SYSTEM TEST from the Setup Menu.

2

Select TEST.

If The System Test Reports

Any Problems...

RUN SYSTEM TEST

SIGNAL

TUNING

PHONE

CARD

RETURN

HELP

The System Test checks all the components automatically, and
displays the result of each test.

3

Select RETURN to return to the Setup Menu.

Check your system for any of the following:

□ Check that all cables are connected properly to the DSS receiver.

□ Check that the satellite antenna is installed correctly, and that the

signal has been optimized. See the manual that came with the
satellite antenna for details.

□ Check that the phone line connected to the DSS receiver is working

properly.

□ Check that the access card is inserted properly.

If you cannot resolve problems reported by the System Test, see

"Customer Support" on page 2.

Chapter 6: Using the Setup Menu 75

Advertising
This manual is related to the following products: