Playing back a tape – Sony CCD-FX620 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections lor Playback
Connecttiia to a TV or VCR Directly wtth A/V Connecting Cable
If your TV or VCR IS a slereo type use the supplied connecting cable, tl your TV or VCR is a monaural
type use a VMC-910MS/920MS A;V Connecting Cable (not suppiiedj. M) Connect the camcorder and your TV
or VCR with the A/V connecting cable. i2i Set IN/OUT on the camcorder to OUT. (3) Align me ngnt side ot me
AC power adaptor with a white line on me camcorder and while pressing the AC power adaptor, slide it m the
directioh of tr>e arrow. (4) Set the VTR (DC OUT),CHARGE selector ot the AC power adaptor to VTR (DC
OUT).
Playing Back a Tape
Connecting to a TV Directly vrithout A/V Connecting Calrta
(1) Connect the camcorder and the TV by using the supplied RFU adaptor (2) Set the channel selector on the
HFU adaptor to 3CH or 4CH whichever is not active m your area. (3) Set IN/OUT of me camcorder to OUT (4)
Align the right side ot the AC power adaptor with a white line on the camcorder and while pressing il, slide it in
the direction of the arrow. (5) Set the VTR (DC OUT)/CHARGE selector of the AC power adaptor to VTR (DC
OUT)
Vou car monitor the playback picture in the viewfinder. You can also monitor it on a TV screen after
connecting the camcorder Ю a TV/VCR (p. 22). You can use the Remote Commander to remotely operate the
camcorder, if HOLD on the commander is set to the right, slide it in the opposite direction.
(11 While pressing the smalf green button on the POWER switch, set the POWER switch to VTR (2) Insert a
recorded cassette with the window facing out (p.i4). (3) Press >. Playback starts.
To stop playback, press C.
To rewind the tape, press
To advance the tape repfdfy, press
Note on (ha recordlng/pfayback modes
You can record a tape m SP (standard play) mode onty. You can play back tapes m both SP and LP (long
play) modes.
The LP indicator appears in the viewfinder when you play back a tape recorded m LP mode. There is no SP,
LP indicator in SP mode.
24
The playback sound is monaural wlien you use (he RFU adaptor
When you view a TV program
Set the VTR (DC OUTVC
ha
RGE selector ot the AC power adaptor to OFF oi
camcorder to OFF.
я the POWER switch of the
See ne>i page for further information
25