Sony CCD-FX620 - Manual (Page 20)

Recording from a TV or VCR
Von can insert a new scene from a tape on a VCR into your originally recorded tape by setting the starting point
and stopping point.
{•]
[b]
To Check the Picture from a TV or VCR before Recording
Slide e. and then press II to checK the picture in the viewfinder. It ycu take time to press II after sliding e
recording starts.
To Stop Recording
Press □.
Before starting insert editing, set your VCR to the playback pauae mode at lha baginning o< the scarta to ba
racordad. (1) On your camcorder, locate the end pom! where the insert should end by pressing ■♦d or ►►
after pressing > [b]. (2) At the end point, press COUNTER RESET to set the counter to zero. (3) Locate the
point where you want to start the insertion by pressing and press
II [a], (4) Slide e to set the camcorder
into recording pause nrode. The picture in the viewfinder switches to the VCR. (5) Press ZERO MEM to stop
recording at the counter's zero point. The end point of the insert is stored in memory. (6) Press II on the
cantcorder and the VCR to start insert editing. You car moritor the picture being inserted in the viewfinder
screen. The insert recording stops aotomabcaJly near the zero point on the camcorder's counter
To Change the End Point
Press ZERO MEM so that the ZERO MEM indicatof disappears, and begin again from step 1