Sony CCD-FX620 - Manual (Page 19)

Inserting a Scene in the Middle of a Recorded Tape Editing onto Another Tape
^editing with any other II 8 mm. HiOl HiS. IQ Betamax. vus VMS.
S-VHSC VCR that has audio/video inputs.
? • Ar
"
I'#-.
; 'siAi?
[»-a-
'
[a] [b]
(1) While looking tn ihe viewfinder in Standby mode, keep pressing the * or - side ol EDITSEARCH and
release the button where you want to end the insertion (b). (2) Press COUNTER RESET to set counter to
zero. (3) While looking m the viewfinder, keep pressing the - side ot EDITSEARCH and release the button
wnere you want lo start the insertion [a|. (A) Press ZERO MEM to stop recording of insert at the counter s ze
point. (5) Press STARTi'STOP Insert recording begins. The insert recording stops automatically at the
counter s zero point.
Canceling the ZERO MEM
Press ZERO MEM The ZERO MEM indicator disappears.
Before Editing
After connecting the camcorder to your VCR (p. 22-24). |1) Set the POWER switch to VTR. (2| If you do n
use the connecting adaptor, set IN/OUT to OUT. (3) Slide EDIT on the camcorder m the direction ot the an
To Start Editing
36
(1) Insert a blank tape (or a tape you want to record oven into the recording VCR Then insert your recorded
tape into the camcorder (2) Play back the recorded tape on the camcorder until you locate the point where
you want to start editing. Then set the camcorder to playback pause mode. (3) Set the recording VCR to
recording pause mode. (4) Press II on the camcorder and VCR simultaneously to start editing.
To Edit More Scenes
Repeat steps 2 to 4.
To Slop Editing
Press (” Oh the camcorder ^d VCR.
Use of the EDITSEARCH button
To play back a tape m the forward or reverse direction, keep pressing EDITSEARCH during playback pause.
You can play back still pictures successively at specific intervals by pressing EDITSEARCH intermittently.
Note on the DATA SCREEN function
II you have displayed the viewfinder screen indicators on the TV (DATA SCREEN function), erase the
indicators by pressing DATA SCREEN on the Remote Commander so that they will not be recorded on the
edited tape.
Notes on EDIT
• It functions when using the camcorder as a VCR for playback.
• By using EDIT, you can keep picture and sound deterioration resulting from editing to a minimum
• Avoid recording re-recorded tapes
37