Sony STR-AV1070X - Manual (Page 13)

Q] Program control section (RM-P311 only)
Mode selector and indicator (page 34)
SONY STD: To control Sony equipment.
USER STD: To control equipment whose remote
control functions are stored.
LEARN: To store functions of other remote
commanders emitting infrared rays.
PROGRAM OLEAR button: Clears the stored
functions.
[ 2 } MODE selector
1: To select the functions indicated in light gray such
as DECK, DAT, CD player and CURSOR/
SURROUND mode of the receiver.
2: Taseiect the functions indicated in blue such as
VTR, LDP (Laser disc player) and TV.
[3] Cursor control section
CURSOR operation buttons
MODE button: Selects cursor mode.
S] Sound control section
SURROUND buttons
ON/OFF: Turns on/off the surround mode.
MODE: Selects the surround mode.
T. (test) TONE: Generates a pink noise signal that is
sent in succession to each speaker.
EQ (equalizer) ON/OFF button: Turns on/off the
equalizer.
S.(sound) FIELD buttons
MODE: Selects sound field mode.
USER/PRESET button (RM-P311 only): This button
does not operate.
DBFS button (RM-U211 only): Turns on/off the DBFB
(Dynamic Bass Feed Back).
DDS/DBFB button (RM-P311 only): Turns on/off the
DBFB (Dynamic Bass Feed Back). (DDS function is
not available with this receiver.)
[H Amplifier section
FUNCTION selectors: Select an input source of the
receiver. (The VIDEO 3 button does not operate on
the STR-AV970X.)
DIGITAL button (RM-P311 only): This button does not
operate.
REAR LEVEL +/- buttons: Control the volume of rear
speakers (surround level).
MUTING button: Mutes the sound.
MASTER VOL +/- buttons: Control the receiver
volume.
CENTER LEVEL +/- buttons : Control the volume of
center speaker (surround level).
ONSCREEN buttons (RM-P311 only)
ON/OFF button: This button does not operate.
TITLER ON/OFF button: This button does not
operate/
[S Control for other equipment
Power control block
SYSTEM OFF button: Turns off the power of the
whole system: LDP, VTR, TV and AUDIO.
LDP/VTRATV/AUDIO POWER buttons: Control the
power of each unit.
CDP/LDP control block
D (disc) SKIP: Disc skip (for a CD player equipped
with a multi-disc changer)
► : Starts play.
Locates a desired selection (for a CD
player only with RM-U211)
■: Stops play.
-♦^/►►: Manual search (for a laser disc player only
with RM-U211)
II: Pause
TAPE/DAT/VTR control block
ANT TV/VTR button: Selects the output signal from
the antenna terminal on the VCR, either a TV signal
or VCR programs.
VTR CH +1- buttons: Select channel on the VCR.
■♦</►►: fast winding
■ : Stop
◄/►: Play
II: Pause
•: Recording (RM-U21T. While pressing •, press ►)
REC MODE REV/FWD buttons (RM-P311 only):
For reverse recording, press REV and • together.
For forward recording, press FWD and • together.
DECK/VTR selector (RM-U211 only)
MODE 1(DECK A,B and DAT): Selects DECK A, B
or DAT.
MODE 2(VTR 1, 2 and 3): Selects VTR 1,2 or 3.
VTR 1: Betamax VCRs
VTR 2: 8mm VCRs
VTR3: VHSVCRs
TV control block
TV/VIDEO selector: Selects the program to see : TV
or VIDEO.
VOL +/- buttons: Control the TV volume.
CFI +/- buttons: Select a preset channel.
Program number (1 to 0) and ENTER buttons: Select
the channel.
E] SLEEP button
Set to the SLEEP timer mode. In this mode, the unit is
automatically turned off after 60 minutes.
[H Tuner section
INDEX SELECT and INDEX buttons: Select an
indexed preset station.
TUNER SHIFT and PRESET +/- buttons: Select a
preset station.
m RESET button (RM-P311 only)
Reset the commander to the initial state.
Note on the • (recording) button under [H TAPE/DAT/VTR
buttons
If your recorder is of such type as pressing • puts It in recording
pause mode, first press • on this commander and then
11
.
Note:
The -^/^ (play) buttons in 1
- buttons in [B can function without pressing one of the FUNCTION
buttons in ID, if the CD player is connected to the CD jacks, the
tape deck to the TAPE jacks and the video deck to the VIDEO 1
jacks (switch the DECK/VTR selector on the remote commander to
VTR 1),
] and the SHIFT button and PRESET +/
13