Connections for playback, Cotmections for playback – Sony DCR-TR7000 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
— Playback - Basics —
Connections for playback
Connect your camcorder to your TV or VCR witìì the A/V connecting cable supplied
witfi your camcorder to watch the playback picture on the TV screen. When monitoring
the playback picture on the TV screen, we recommend that you power your camcorder
from a wall outlet using the AC power adaptor (p. 11). Refer to àie operating
instructions of your TV or VCR.
Open-the jack cover. Connect your camcorder to the TV using the A/V connecting
cable. Then, set the TV/ VCR selector on the TV to VCR.
AUDIO
: Signal flow
Connect your camcorder to tt\e LINE IN input on the VCR by using the A/V connecting
cable supplied with your camcorder. Set the input selector on the VCR to LINE.
Connect the yellow plug for video and the white plug for audio on both your
camcorder and the TV or the VCR (you do not connect the red plug).
With this connecti<m, the sound is monaural even on stereo models.
T^olwnect to a TV or VCR without Video/Audio input jacks
Use an NTSC system RFU adaptor (not supplied).
Refer to the operating instructions of your TV or VCR and the RFU adaptor. With an
RFU adaptor, the sound is monaural.
If your TV or VCR has an S video jack
Connect using an S video cable (not supplied) to obtain high-quality pictures. With this
connection, you do not need to cormect the yellow (video) plug of the A/V connectirig
cable.
Cormect the S video cable (not supplied) to the S video jacks on both your camcorder
and the TV or the VCR.
20