Sony DCR-TR7000 - Manual (Page 47)

— Editing on Other Equipment —
Dubbing a tape
Using the AIM connecting cabie or S video connecting cabie
(not suppiied)
Connect your camcorder to the VCR using tt\e A/V connecting cable supplied with
your camcorder.
Set the input selector on the VCR to LINE, if available.
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert
the recorded tape into your camcorder.
(2) Set the POWER switch to VTR.
(3) Play back the recorded tape on your camcorder.
(4) Start recording on the VCR.
S VIDEO
AUDIO
. : Signal flow
s
When you have finished dubbing a tape
Press ■ on both your camcorder and the VCR.
If you have displayed the viewfinder indicators on the TV
Make the indicators disappear by pressing SEARCH MODE or DISPLAY on the Remote
Commander, or DATA CODE so that they will not be superimposed on the edited tape.
You can edit on VCRs that support the following systems
0 8 mm. Him Hi8, Bffi VHS, S№ S-VHS, WKW VHSC, SSBSa S-VHSC, ID Betamax,
B3Sa»l ED Betamax, “"IX’ nuni DV, DT DV or I) DigitalS
If your VCR is a monaural type
Cotmect the yellow plug for video and the white plug for audio on both your
camcorder and the VCR. You do not need to connect the red plug. With this connection,
the sound will be monaural.
Connect using an S video cable (not supplied) to obtain high-quality pictures
With this connection, you do not need to coimect the yellow (video) plug of the A/V
connecting cable.
Connect an S video cable (not supplied) to the S video jacks of both your camcorder and
the VCR.
To perform a more precise editing
Connect a LANC cable (not supplied) to your camcorder and other video equipment
having fine synchro-editing function, using this camcorder as a player.
47