Playing back a tape with digital effects, To cancel the digital effect function – Sony DCR-TR7000 User Manual
Page 41
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
Playing back a tape with digital effects
During playback, you can process a scene using the digital effect functions: STILL,
FLASH, LUMl. and TRAIL.
(1)
During playback, press DIGITAL EFFECT and turn the SEL/PUSH EXEC dial
until the desired digital effect indicator (STILL, FLASH, LUML or TRAIL)
flashes.
(2)
Press the SEL/PUSH EXEC dial.
The digital effect indicator lights up and the bars appear. In the STILL or
LUMl. mode, the picture where you press the SEL/PUSH EXEC dial is stored
in memory as a still picture.
(3)
Turn the SEL/PUSH EXEC dial to adjust the effect.
For details of each digital effect function, see page 32.
o
H
To cancel the digital effect function
Press DIGITAL EFFECT.
•
Notes
• The digital effect function works oitly for tapes recorded in the DigitalS H system.
• You cannot process scenes externally input scenes using the digital effect function.
• To record picture you apply digital effect, record the pictures on the VCR.
Piaures processed by the digital effect function
Pictures processed by the digital effect function are not output through the g DV IN/
OUT jack.
When you set the POWER switch to OFF or stop playing back
The digital effect function is automaticaEy canceled.
41