Sony CCD-TRV30 - Manual (Page 11)

Playing Back a Tape Searching for the End of the Picture
Various Playback Modes
ou can enjoy noiseless pictures on the LCD screen during still, slow and picture search. (CRYSTAL-
: lear still/slow/picture search)
To View a Still Picture (Playback pause)
'ress II during playback. To resume playback, press II or O.
To Locate a Scene (Picture search)
<eep press or ►► during playback. To resume normal playback, release the button.
To Monitor the High-speed Picture while Advancing the Tape or Rewinding
(Skip scan)
Keep pressing ◄◄ while rewinding or ►► while advancing the tape. To resume normal playback,
press t>.
To View the Picture in a Sequence of Stop-motion images
Press EDITSEARCH in Playback pause mode. If you keep pressing EDITSEARCH, you can view the
picture play back in the forward (+) or reverse (-) direction.
To View the Picture at 1/5 Speed (Slow playback) (only with the Remote
Commander)
Press I»- on the Remote Commander during playback. To resume normal playback, press O. If slow
playback lasts for about 1 minute, it shifts to normal speed automatically.
Notes on playback
• Streaks appear and the sound is muted in the various playback modes.
• When Playback pause mode lasts for 5 minutes, the camcorder automatically enters stop mode.
You can go to the end of the recorded portion. Press END SEARCH after you record and play back the
tape. The tape starts rewinding or fast-forwarding and the last 3 seconds of the recorded position plays
back. Then the tape stops at the end of the recorded picture (End Search).
It is convenient when you restart recording after you played back the recorded portion.
(1) While pressing PUSH OPEN, open the LCD panel.
(2) Press END SEARCH.
This function works when the POWER switch is set to either CAMERA or VTR.
End Search function does not work once you eject the cassette after you recorded in the tape.