Tape transport buttons (p.18, 19), Display button (p.19), Preparing the remote commander – Sony CCD-TRV30 User Manual
Page 27: Note on battery life, To avoid damage from possible battery leakage, Using the remote commander, Identifying the parts
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Identifying the Parts
Attaching the shoulder strap
Attach the supplied shoulder strap to the hooks for the shoulder strap (HI on page 52).
The buttons that have the same name on the Remote Commander and on the camcorder function
identically.
Point toward the remote sensor to control the camcorder after turning on the POWER switch on the
camcorder.
] Tape transport buttons (p.18, 19)
] DISPLAY button (p.19)
] Size AA (R6) battery holder
] START/STOP button
] Power zoom button
The zooming speed is unchangeable on the Remote Commander.
Preparing the Remote Commander
To use the Remote Commander, you must insert two size AA (R6) batteries. Use the supplied size A.\
(R6) batteries.
(
1
)
Remove the battery cover from the Remote Commander.
(
2
)
Insert both of the size AA (R6) batteries with connect polarity.
(3)
Put the battery cover back onto the Remote Commander.
Note on battery life
The battery for the Remote Commander last about 6 months under normal operation. When the
batteries become weak or dead, the Remote Commander does not work.
To avoid damage from possible battery leakage
Remove the batteries when you will not use the Remote Commander for a long time.
Using the Remote Commander
Make sure that the COMMANDER mode is set to ON in the menu system (p.32).
o
e
o
CUD
t 1
( ......)
( )
MENU
COMMANDER
O'
n
:
OFF
[MENU] ■ END