Connection, Your setup, Notes about the hdmi out jack – Sony BDP-S301 User Manual

Page 12: Step 3: connecting the audio cords

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

step 3: Connecting the

Audio Cords

Select the connection that best suits your system. Be sure to read

the instructions for the components you wish to connect.

Connection

TV

Stereo amplifier (receiver) and

two speakers

AV amplifier (receiver) having a

Dolby ' Surround (Pro Logic)

decoder and 3 to 6 speakers

• Surround effects: Dolby Surround

(Pro Logic)

AV amplifier (receiver) with
S.lch input jacks and 6 speakers

• Surround effects: Dolby Digital

(S.lch), DTS(5.1ch) ’

"

AV amplifier (receiver) with a
digital input jack having a Dolby

Digital or DTS ■ decoder and 6

speakers

• Surround effects: Dolby Digital

(S.lch). DTS (S.lch)

AV amplifier (receiver) with an

HDMI input jack and 8 speakers

• Surround effects: 8ch Linear

PCM

Your setup

ManufacUired under license from Dolby laboratories.
"Dolby.” "Pro Logic.” and the double-D symbol are trademarks of

Dolby Laboratories.

■ “DTS” and “DTS Digital Surround” are registered trademarks of

DTS, Inc.

Notes about the HDMI OUT jack

• When you connect the player to an AV amplifier (receiver)

using an HDMI cord, you will need to do one of the following:

-Connect the AV amplifier (receiver) to a TV with the HDMI

cord,

-Connect the player to the TV with a video cord other than an

HDMI

cord

(component

video

cord,

S

VIDEO

cord,

or

video

cord).

When

connecting

to

the

HDMI

OUT

jack,

carefully

align

the

HDMI connector with the jack. Do not bend or apply pre.s.sure

to the HDMI cord.

• If you change the component connected to the HDMI OUT

jack, change “Audio (HDMI)” in “Audio Setup” to match the

new component

(page 47).

The player stores the HDMI related

settings for up to five components.

• The HDMI connection is compatible with 2ch Linear PCM

signals (48 to 192 kHz, 16/20/24 bit), and 6 to Sch Linear PCM

signals (48 to 96 kHz, 16/20/24 bit), in addition to Dolby

Digital and DTS bit stream (5. Ich signals up to 96 kHz, 16/20/

24bit),

If you connect a component that does not conform to the selected audio

signal, a loud noise (or no sound) will conic out from the speakers, w'hich
could damage your ears or spetikcrs.

1 2

Advertising