Sony KFO50WE610 User Manual
V ega
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- V EGA
- Electric appliances can cause fire or high temperature, resulting in injury or death. Be sure to follow the instructions below.
- Do not touch the front glass of a new lamp or the glass of the lamp receptacle. This may reduce picture quality or lamp life.
- -ife) Do not touch the front glass of a new lamp or the glass of the lamp receptacle. This may reduce picture quality or lamp life.
- -ife) After it has cooled, place the removed lamp into the empty box of the replacement lamp. Never put the removed lamp into a plastic bag.
- ^ To receive channels with an antenna, you need to turn your Cable to Off (see page 76) and perform the Auto Program function (see page 76).
- ^ Pressing ANT on the remote control switches between the channels coming in through the cable box (scrambled) and those coming directly to the TV (unscrambled).
- ^ If your VCR is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable.
- ^ To view scrambled channels, set your LCD projection TV to AUX 3 or 4 (depending on your cable box output). Change channels using your cable box.
- ^ If your satellite receiver is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable.
- The Y B-Y and R-Y jacks on your DVD player are sometimes labeled Y Y Cb and Cr, or Y Pb and Pr. If so, connect the cables to like colors, a
- To take advantage of the Wide Screen modes, set the TV's aspect ratio to 16:9 on your DVD player. For details, refer to the operating instructions supplied with your DVD player.
- I#
- -S&) The DVI-HDTV VIDEO connector does not provide audio, so audio cables must be connected to provide sound.
- ^ If you have a mono camcorder, connect its left audio output to the LCD projection TV's AUDIO L (MONO) Jack.
- ^ If your camcorder is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable.
- ^ The Auto Setup feature does not apply for installations that use a cable box for all channel selection.
- ^ You can run Auto Program by selecting it in the Channel menu, as described on page 76.
- GO-
- When the remote control function is set to other than TV function, you can display the Favorite Channels. However, you cannot select the channel by using ♦ or
- i&i When you adjust the twin screen sizes, the LCD projection TV memorizes the change. The next time you use the Twin View function, the memorized sizes appear.
- ^ Freeze feature is not available if you are already in Favorite Channel (see page 49) or Twin View™ (see page 50).
- ^ "Memory Stick", "Memory Stick PRO", "Memory Stick Duo" and" "
- are registered trademarks of Sony Corporation.
- ^ To protect small children from injury from Memory Stick Media, remove all Memory Stick media from the LCD projection TV's Memory Stick slot and store it in a safe location when it is not in use.
- ^ The rewind and fast-forward may not work due to the movie file.
- ^ The Sort function works only when fewer than 2000 files are saved.
- Select Off in Digi. Cam. Mode.
- ^ You can alter the Video menu settings (Picture, Brightness, Color, etc.) for each Mode.
- ^ We recommend selecting Standard for normal home use.
- Mild Mode is unavailable when the Mode is set to vivid.
- Advanced Video is unavailable when you have selected Mild picture mode, or you are watching 1080i, 720p and 480p sources with Video 5 to 7 inputs.
- ® An image may not be corrected due to the connected equipment.
- ^ You need your password for any future access into the Parent Menu. If you lose your password, see "Lost password" on page 97.
- ^ The content ratings will increase depending on the level of the age-based rating. For example, a program with a TV-PG V (Violence) rating may contain moderate violence, while a TV-14 V (Violence) rating may contain more intense violence.
- i&i When you select "Receiver" on Video Label, your LCD projection TV's input is fixed (for Video 1 only).
- ^ To go directly to programming fimer 1 or 2, press instead of pressing Current Time
- ^ The equipment must have infrared (IR) remote capability in order to be used with the remote control.
- Â) When no code number is input for 30 seconds or invalid or incorrect numbers are input, the remote control is reset to the normal TV remote control mode.