Sony KFO50WE610 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Do not overload wall outlets, extension

cords or convenience receptacles

beyond their capacity, since this can

result in fire or electric shock.

Always turn the set off when it is not

being used. When the set is left

unattended and unused for long

periods of time, unplug it from the

wall outlet as a precaution against the

possibility of an internal malfunction that could create a

fire hazard.

If a snapping or popping sound from a TV

o

set is continuous or frequent while the TV ^„^p|

is operating, unplug the TV and consult

your dealer or service technician. It is

normal for some TV sets to make

occasional snapping or popping sounds,

particularly when being turned on or off.

Never push objects of any kind into the

set through the cabinet slots as they may

touch dangerous voltage points or short

out parts that could result in a fire or

electric shock. Never spill liquid of any

kind on the set.

Do not use attachments not

recommended by the manufacturer, as

they may cause hazards.

Clean the cabinet of the LCD Projection

TV with a dry soft cloth. To remove dust

from the screen, wipe it gently with a soft

cloth. Stubborn stains may be removed

with a cloth slightly dampened with

solution of mild soap and warm water. Never use strong

solvents such as thinner or benzine for cleaning.

If the picture becomes dark after using the LCD

Projection TV for a long period of time, it may be

necessary to clean the inside of the LCD Projection TV.

Consult qualified service personnel.

The screen surface has a special coating to reduce a

picture displayed by reflecting. If you clean the screen

surface in the wrong way, the screen may be damaged. To

clean the screen, do as follows:

Clean the screen with a soft cloth, such as the

supplied cleaning cloth or a glass cleaning cloth.

To remove hard contamination, use the supplied

cleaning cloth or a glass cleaning cloth moistened

with a solution of mild detergent and water.

Do not use any type of abrasive pad, alkaline

cleaner, acid cleaner, scouring powder, chemical

cloth, or solvent such as alcohol, benzene or thinner,

as these may scratch the screen's coating.

Do not use power-line operated sets

near water — for example, near a

bathtub, washbowl, kitchen sink, or |c^

laundry tub, in a wet basement, or

near a swimming pool, etc.

Do not place the set on an unstable

cart, stand, table or shelf The set

may fall, causing serious injury to a

child or an adult and serious damage

to the set. Use only a cart or stand

recommended by the manufacturer

for the specific model of LCD

Projection TV. An appliance and cart

combination should be moved with

care. Quick stops, excessive force,

and uneven surfaces may cause the appliance and cart

combination to overturn.

The slots and openings in the cabinet and in the back or

bottom are provided for necessary ventilation. To ensure

reliable operation of the set, and to protect it from

overheating, these slots and openings must never be

blocked or covered.

Never cover the slots and openings

with a cloth or other materials.

Advertising
This manual is related to the following products: