Sony KFO50WE610 - Manual (Page 30)

b BCit BtiB CbiBB) Si:;X
Use this hookup if:
Yo ur cable T V company scrambles some channels, but not all of them
(pay channels vs. regular cable channels) and you need to use a cable
box, and
You want to enjoy the Twin View feature.
With this setup you can:
Use the LCD projection T V remote control to change channels on your
cable box when the signal is scrambled. To program your Sony remote
control to operate your cable box, see “Programming the Remote
Control” on page 86.
; Use the LCD projection T V remote control to change channels using
your LCD projection T V when the signal is not scrambled. Your LCD
projection T V’s tuner provides a better signal than the cable box.
; Use the Twin View feature. (When all channels are routed through your
cable box, only one signal is sent to the LCD projection TV, so you
cannot use the Twin View feature.)
C^yi'iri'rcirna ih<: i.Cy.' 'fly/n^cHyn
Connect the Cable TV cable to the LCD projection TV’s VHF/UHF
jack.
Using a coaxial cable, connect the LCD projection TV’s TO
CON VERTER jack to the cable box’s IN jack. The LCD projection
TV’s internal converter allows you to switch between unscrambled
signals coming straight into the LCD projection T V and scrambled
signals coming in through the cable box, eliminating the need for an
external splitter.
Using a coaxial cable, connect the cable box’s OUT jack to the VCR’s
IN jack.
Using AUDIO and S VIDEO cables, connect the VCR’s AUDIO and S
VIDEO OUT jacks to the LCD projection TV’s AUDIO and S VIDEO
IN jacks.
Using a coaxial cable, connect the VCR’s OUT jack to the LCD
projection TV’s AUX jack.
^ To view scrambled channels, set your LCD projection TV to AUX 3 or 4
(depending on your cable box output). Change channels using your
cable box.
30